Avatar pix - Printable Version
+- The CardBoard (https://thecardboard.org/board)
+-- Forum: C-House! (https://thecardboard.org/board/forum-4.html)
+--- Forum: The CardBoard (https://thecardboard.org/board/forum-5.html)
+--- Thread: Avatar pix (/thread-15946.html)
+- The CardBoard (https://thecardboard.org/board)
+-- Forum: C-House! (https://thecardboard.org/board/forum-4.html)
+--- Forum: The CardBoard (https://thecardboard.org/board/forum-5.html)
+--- Thread: Avatar pix (/thread-15946.html)
Avatar pix - CowboyIndian - 05-01-2018
I see most everyone is having the same issue: an avatar pic that worked just fine with the old software is either horizontally or vertically challenged with the new. What to do?
RE: Avatar pix - 82lsju - 05-01-2018
my old one was compressed horizontally. I uploaded a new one and it appears to display correctly.
RE: Avatar pix - Phogge - 05-02-2018
My midsection is compressed horizontally. Is there software to correct it or shall I add additional sit-ups?
RE: Avatar pix - BostonCard - 05-02-2018
From the info for updating your avatar:
Quote:An avatar is a small identifying image shown under the author's name whenever they make a post.
The maximum dimensions for avatars are: 110x110 pixels.
The maximum file size for avatars is 25 KB.
If your avatar is too large, it will automatically be resized.
If your avatar is distorterd, it is probably because you uploaded (or linked) an image that was not square; the software then resized it to be 110 x 110 pixels. Your best bet if you want the avatar to remain undistorted, you should make sure that the avatar is cropped into a square before uploading. Ideally, it would also be scaled to 110 x 110 pixels so that you are happy with the scaling before updating.
BC
RE: Avatar pix - CowboyIndian - 05-02-2018
(05-02-2018, 08:49 AM)BostonCard Wrote: From the info for updating your avatar:
Quote:An avatar is a small identifying image shown under the author's name whenever they make a post.
The maximum dimensions for avatars are: 110x110 pixels.
The maximum file size for avatars is 25 KB.
If your avatar is too large, it will automatically be resized.
If your avatar is distorterd, it is probably because you uploaded (or linked) an image that was not square; the software then resized it to be 110 x 110 pixels. Your best bet if you want the avatar to remain undistorted, you should make sure that the avatar is cropped into a square before uploading. Ideally, it would also be scaled to 110 x 110 pixels so that you are happy with the scaling before updating.
BC
It looks to me as if the avatar will adapt to the dimensions you provide. I uploaded a 4X3 photo and it's displaying correctly. LSJU's avatar isn't square, either.
RE: Avatar pix - terry - 05-02-2018
The new board software was distorting my old avatar. I just went back and uploaded the same photo. It now appears properly. The original dimensions have been preserved, even though the picture is not square.
RE: Avatar pix - washingtonismoney - 05-02-2018
Dumb question but...how does one change the user name/display name? I'm haunted by my original decision to have my log-in name be distinct from my display name.
RE: Avatar pix - 82lsju - 05-02-2018
(05-02-2018, 01:03 PM)dth Wrote: Dumb question but...how does one change the user name/display name? I'm haunted by my original decision to have my log-in name be distinct from my display name.
I don't think you can, at least BobbK could not, maybe one of the admins can change them
RE: Avatar pix - stupac2 - 05-02-2018
(05-02-2018, 01:03 PM)dth Wrote: Dumb question but...how does one change the user name/display name? I'm haunted by my original decision to have my log-in name be distinct from my display name.
The feature is visible for me under the User CP, see attached image. It's possible that this requires elevated permissions currently (the various beta testers, of which I was nominally one, have temporary Moderator status), but I can't figure that out with the tools available to me currently. I think anyone with admin privileges (so Yvonne and maybe Compsci) should be able to debug.
RE: Avatar pix - 82lsju - 05-02-2018
(05-02-2018, 01:58 PM)stupac2 Wrote:(05-02-2018, 01:03 PM)dth Wrote: Dumb question but...how does one change the user name/display name? I'm haunted by my original decision to have my log-in name be distinct from my display name.
The feature is visible for me under the User CP, see attached image. It's possible that this requires elevated permissions currently (the various beta testers, of which I was nominally one, have temporary Moderator status), but I can't figure that out with the tools available to me currently. I think anyone with admin privileges (so Yvonne and maybe Compsci) should be able to debug.
no "change username" selection in User CP for me
RE: Avatar pix - stupac2 - 05-02-2018
(05-02-2018, 03:08 PM)82lsju Wrote: no "change username" selection in User CP for me
Well then an admin is going to need to look into it. (Or I'd be happy to, if I had access to admin tools.)
RE: Avatar pix - admin - 05-02-2018
(05-02-2018, 03:08 PM)82lsju Wrote: no "change username" selection in User CP for me
PM me the name you'd like to have or stupac can change your username by using the Profile Editor under ModCP.
RE: Avatar pix - 82lsju - 05-02-2018
(05-02-2018, 06:05 PM)admin Wrote:(05-02-2018, 03:08 PM)82lsju Wrote: no "change username" selection in User CP for me
PM me the name you'd like to have or stupac can change your username by using the Profile Editor under ModCP.
I'm good with my user name, BobbK and dth both were interested in changing.
RE: Avatar pix - admin - 05-02-2018
OK, they can PM me or stupac to 2006alum — we have two other new mods, but they haven't said they actually want to help moderate. I'd actually like stupac or 200alum to do it just to get accustomed to the mod features.
CompSci87 and I have additional permissions that allow us to both moderate and deal with technical issues related to board functionality.